Publicité
Les langues disponibles
Les langues disponibles
4. Reinstall a clip onto each mounting post with the tongue facing
to the right, to secure the massager to the chair (Fig.5).
Clip
5. Remove the protective backing from the hook-and-loop
fasteners on the back of the calf massager upholstered flap,
then press the flap onto the chair base to secure it (Fig.6).
Protective backing
humantouch.com
Fig.5
Fig.6
Flap
8
Install the Body Pad
1. Locate the heat cable on the left-hand side of the chair seat and the
corresponding cable coming from the body pad (Fig.7).
Body pad heat cable
2. Connect the heat cables until you hear a click, indicating that
the connection is properly secured (Fig.8).
3. Slide the protective rubber casing over the connection to
secure it (Fig.9).
Chair heat cable
Fig.7
click!
Fig.8
Fig.9
9
Publicité
