American Standard 8337018 Manuel Du Propriétaire page 4

2
TOWEL RING AND ROBE HOOK INSTALLATION
• Refer to Step 1 for installation of MOUNTING BRACKETS (2). Align accessory and place ACCESSORY
ESCUTCHEON (1) onto MOUNTING BRACKET (2) Secure accessory with SET SCREW (3) using a
4mm HEX WRENCH (4).
3
INSTALL TOILET PAPER HOLDER
• Refer to Step 1 for installation of MOUNTING BRACKETS (1). NOTE: The center line distance
between the two MOUNTING BRACKETS is 6-1/2" (166mm). Make sure the two MOUNTING
BRACKETS (1) are level.
• Install the ACCESSORY ESCUTCHEONS (2) on the MOUNTING BRACKETS (1). Make sure the
ACCESSORY ESCUTCHEONS (2) with holes for the horizontal shaft are facing inward. Secure
ACCESSORY ESCUTCHEONS (2) with SET SCREW (3) using a 4mm HEX WRENCH (4).
• Install the PAPER HOLDER SHAFT (5) into the mounted ACCESSORY ESCUTCHEONS (2).
4
5
1
3
4
6-1/2" (166mm)
1
Level
2
3
4
2
FINISHED WALL
2
1
3
4
FINISHED WALL
1
2
3
4