Thor Kitchen TMD2401 Instructions D'installation page 9

Move oven location
downward for extended
countertops for better
viewing angle.
D
Front face
of cabinet
Figure 5B: 24" Drawer Microwave
Flush Mount Cabinet Preparation (side view)
Shelf detail showing the deflector vent during installation.
Position deflector vent and mark holes. Pre drill using a
1
/ " (1.57 mm) bit before mounting.
16
Figure 6A: Deflector Vent Installation for
24" Drawer Microwave (during installation)
E
24" DRAWER MICROWAVE FLUSH MOUNT
Anti-Tip block
A
C L
Figure 5A: 24" Drawer Microwave Flush Mount Cabinet Preparation (top view)
E
F
Side view
Mounting cleat
Drawer face B
Top view
KEY
A 22" (558.8 mm) mounting cleat opening width
Anti-Tip
B 0" (0.0 mm) cabinet face to drawer face
block
C 1-3/8" (34.93 mm) mounting surface
of cleat to cabinet face
D 16-7/8" (428.62 mm) flush opening height
E 3/4" (19.05 mm) shelf thickness
F 1-3/4" (44.45 mm) front face of shelf
to front face of cabinet
Shelf detail showing the deflector shield installed.
9
Note: the mounting surface
of the finished cleat must sit
1-3/8"
the face of the cabinet.
C
Cabinet
face
DESCRIPTION
Note: Key refers to Figures 5A and 5B.
Figure 6B: Deflector Vent Installation for
24" Drawer Microwave (after installation)
(34.93 mm) back from