Thor Kitchen TMD2401 Instructions D'installation page 15

DRAWER INSTALLATION
A
PARTS SUPPLIED
B
4 Screws
1. Place the drawer adjacent to the wall or cabinet opening.
Plug the power supply cord into the electrical outlet.
2. Carefully guide the drawer into the prepared opening. Avoid
pinching the cord between the oven and the wall.
3. Slide the drawer all the way until the mounting flange is
flush with the face of the cabinet.
4. Open the drawer. Using the 4 holes on the drawer as a
template, pre drill the cabinet using a 1/16" bit.
5. Secure the drawer with the 4 screws supplied.
E
INSTALLATION GUIDE
Mounting Screws
15
MODEL AND SERIAL
NUMBER LOCATION
The nameplate includes model number and serial number. Open
the Drawer Microwave fully. The label is slightly beyond the back
wall of the microwave cavity facing up from the flat surface.
CARE, CLEANING AND MAINTENANCE
Refer to the User Manual for cleaning instructions.
BEFORE YOU CALL FOR SERVICE
Read the BEFORE YOU CALL FOR SERVICE and operating
instruction sections in your User Manual. It may save you time
and expense. The list includes common occurrences that are
not the result of defective workmanship or materials in this
Drawer Microwave.