Publicité
Les langues disponibles
Les langues disponibles
6. START UP INSTRUCTIONS
6.1. UNPACKING AND LIST OF MATERIALS
This machine includes the following items that you will
find inside the box:
1. Flexible hose
2. Control tube
3. Clamp
4. Intermediate tube
5. Mouthpiece
6. Control knob
7. Threaded knob
6
7
2
Carefully remove all items from the box and make
sure that all listed items are present. Carefully inspect
the product to ensure that there are no damaged
elements.
If you find any damaged or missing parts, do not
use the machine until the defect has been repaired
or all the missing pieces replaced. Using the machine
without all of its parts or with defective parts can
cause severe personal injury.
3
1
3
4
5
6.2. ASSEMBLY
Connect the flexible hose to the tube using the
clamps. Use the clamps to secure the wiring to the
flexible hose.
Remove the threaded knob from the handle bracket
(1), align the handle bracket with the convex of the
control tube. Attach the handle bracket to the control
tube and replace the threaded knob.
Adjust the position and angle to achieve a comfortable
working position and tighten.
Remove the knob from the other bracket and place it
on the control tube, replace the knob and tighten
Assemble the intermediate tube to the control tube,
then connect the blower nozzle to the intermediate
tube.
31/124
English
1
Publicité
