Fulgor Milano SUPREME SPO 6213 Mode D'emploi page 28

GB
Timer programming: cooking time
The countdown begins now. After the indicated time has elapsed, the oven will beep and
the heating elements, and cooking, will be turned off. The following words will appear on
the display: "Program finished remove the dish": press any button to stop the beeping
or open the door. After one minute, the oven will automatically turn off, if other cooking
functions have not been set.
Timer programming: end-of-cooking time
26
Once the cooking time is entered, the display will flash the current
time again and the "cooking time" symbol will be lit.
Touch the timer symbol once and
the relative symbol will light up.
Plus, the clock display will replace
the current time:
The separator dots flash to indicate
that you can program the cooking
time.
Touch the timer symbol two times and
the relative symbol will light up.
The separator does will flash to
indicate that you can set the end-of-
cooking time.