Publicité
Les langues disponibles
Les langues disponibles
en
1 Safety instructions and recommendations
This appliance must be connected to the protective earthing in accordance with prevailing installation standards. Earth the
appliance before making any electrical connections. Incomplete grounding can cause a malfunction or electric shock.
To avoid electric shock, check that the length of the conductors between the cable clamp and the terminal blocks is such that
the active conductors are put under tension before the earth conductor.
Install a circuit breaker that meets the specifications in the installation manual and local regulations and laws.
If a power supply cable comes with the appliance and it turns out to be damaged, it must be replaced by the manufacturer, its
after-sales service or persons with similar qualifications in order to avoid danger.
Separate the extra-low voltage cables from the 230/400 V power supply cables.
See the Electrical connections chapter for the following operations:
Choosing the type and calibre of the protective equipment
Connection to the electrical network
Wiring the appliance
Maintenance and repair work
Remove the casing only to perform maintenance and repair work. Put the casing back in place after maintenance and repair
work.
Repair and maintenance of electrical components must include initial safety checks and component inspection procedures. In
the event of a fault that could compromise safety, no power supply may be connected to the circuit until said fault has been
dealt with satisfactorily. If the fault cannot be corrected immediately but it is necessary to continue operation, an appropriate
temporary solution must be adopted. This shall be reported to the owner of the equipment to ensure all parties are duly
informed.
Initial safety checks shall include:
Discharging of the capacitors: this shall be done in a safe manner to avoid any possibility of sparking
Ensuring no live electrical components and wiring are exposed while charging, recovering or draining the system
Ensuring the continuity of the earth bonding.
Before any work, switch off the power supply for all the components of your installation.
Use only original spare parts.
Guidelines for the user
Keep the appliance accessible at all times to allow work to be performed.
Never remove or cover the labels and data plates affixed to appliances. These must be legible throughout the entire lifetime of
the appliance.
Manufacturer's liabilities
Our products are manufactured in compliance with the requirements of the various applicable directives. They are therefore
delivered with the
marking and any documents necessary. In the interests of the quality of our products, we strive constantly
to improve them. We therefore reserve the right to modify the specifications given in this document.
Our liability as manufacturer may not be invoked in the following cases:
Failure to abide by the instructions on installing, commissioning and maintaining the appliance
Failure to abide by the instructions on using the appliance
Faulty or insufficient maintenance of the appliance
Responsibilities of the installer
The installer is responsible for the installation and initial commissioning of the appliance. The installer must observe the
following instructions:
Read and follow the instructions given in the manuals provided with the appliance
Install the appliance in compliance with prevailing legislation and standards
Carry out initial commissioning and any checks necessary
Explain the installation to the user
If maintenance is necessary, warn the user of the obligation to check the appliance and keep it in good working order
Hand over all manuals to the user
Responsibilities of the user
To guarantee optimum operation of the system, you must abide by the following instructions:
Read and follow the instructions given in the manuals provided with the appliance
Call on a qualified professional to carry out installation and initial commissioning
Get your installer to explain your installation to you
Have the required inspections and maintenance carried out by a qualified installer
Keep the instruction manuals in good condition close to the appliance
18
7798599 - v03 - 29052024
Publicité
