MAINTENANCE
• Cleaning: For cleaning, simply use a cloth moistened
with neutral liquid detergents. Do not use cleaning tools or
instruments.
●Suction panel : Clean the perimeter suction panel as
frequently as the grease filter.
●
Anti-Grease Filter: It must be cleaned once a
month (or when the filter saturation indication system - if
any - indicates the need for it), with non-aggressive
detergents, either by hand or in a dishwasher at a low
temperature and on a short cycle.
When cleaned in the dishwasher, the metal grease filter
may discolour, but its filtering characteristics remain
unchanged.
• The Anti-Grease Filter traps the grease particles
produced during cooking. When cleaned in the
dishwasher, the metal grease filter may discolour, but its
filtering characteristics remain unchanged.
●
Washable activated carbon filter (for filter
version only):
The carbon filter can be washed every two months (or
when indicated by the filter saturation system - if included
in your model). As indicated in the drawing section:
remove the grease filter, remove the carbon filter and
wash using hot water and suitable detergents or in a
dishwasher at 65°C (if washing in a dishwasher, carry out
the complete washing cycle without dishes inside).
Remove any excess water without damaging the filter,
then place it in the oven for 10 minutes at 100°C to dry it
out completely. Put the anti-grease filters back in place.
Replace the foam layer every 3 years and each time the
cloth appears damaged.
●
Carbon filter (for filter version only): The
cartridge must be replaced at least every four months. It
CANNOT be washed or regenerated. As indicated in the
drawings section: remove the anti-grease filters, apply a
carbon filter on each side and attach it to the product. Put
the anti-grease filters back in place.
Illumination
• The lighting system is based on LED technology. LEDs
provide optimal illumination, last up to 10 times longer
than conventional lamps and save 90% of electricity.
●Lighting system : The lighting system cannot be
replaced by the user, contact Customer Service in case of
malfunction.
13