EXIT Toys MSE-054-V01 Mode D'emploi page 10

Regular inspections on the product
Check the situation of your EXIT Product before each use, otherwise overturn or other hazards may
occur during use. Perform regular inspections on below mentioned critical parts, if installed, on
tightness, fixation, damage, wear, or rust:
• Check anchoring system and bolts and nuts of anchoring system.
• Check fixation parts of hanging accessories like rings, punch bag.
• Check fixation of all screws, nuts and bolts of climbing wall, if applicable.
• Check fixation of accessories like tumble bar(s), dip station, brackets of barbell, brackets of battle
rope.
• Check the condition of rings, trapeze and the condition of their ropes.
• Stop use the product when any defects were found.
• Stop use the product if there is any doubt about the safety.
Special care should be taken as weather conditions change
• WARNING. Do not use the product during thunderstorms, as metal tubes can conduct lightning.
• Tongues and lips can stick to metalwork at subzero temperatures.
• In warmer and sunnier conditions, parts can become hot. The temperature should be checked
regularly during use, especially metal parts.
• If high wind is expected, please ensure the structure and accessories are well secured.
• WARNING. Do not use the product when wet, parts can get slippery.
Wood
Please be aware of the facts:
• Weather influences on the wood can cause it to warp or split. This does not have a negative
influence on the structure.
• This type of wood provides natural protection against rot, mold and vermin.
• In seasons with higher humidity black dots can occur, this is not harmful and will disappear when
humidity drops, and temperatures rise. If you want to remove this, it can be washed off with soap.
Warranty
1. After the date of the purchase invoice, the owner of the EXIT product has a:
• 10-year warranty on the main frame.
• 5-year warranty on ground anchors.
• 2-year warranty on components & accessories.
10
www.exittoys.com
MSE-054-V01