REATTACHING THE REFRIGERATOR
DOORS
Assemble
the Refrigerator
doors
1. Reattach two flat head screws(I]_))
and two hex head
screws((_)
to the hinge completely.
2. Place the hole in the bottom
of the door((_)over
the lower
hinge ((_)
_Be
aware not to miss the hinge cap because
can
it
be easily taken off.
@
3. Insert the upper hinge shaft((]_)
into the hole on the
corner of the Refrigerator
door(j_j).
Make sure the hinge
is level between the upper hinge hole((_)
and the hole of
the cabinet((_)
and reattach the hinge screws((_))
and
ground screw(l_])
by turning
in a clockwise
direction.
Reconnect
the wires.
\
@
4. Place the front edge of the top table((_])
on the front of the
upper hinge((_)
and reattach with three screws.
_When
reattaching
top table,
sure
the
make
that the
wires are not pressed or damaged by the top table.
Sett]g
Up 11
DA68-O1812H.indb
11
2009.8.10
9:4:11
AM