Philips HU4814 Mode D'emploi page 9

Change the fan speed
Auto
The auto mode uses the digital
sensor to constantly monitor the air
humidity. It turns your humidifier on
and off whenever needed to ensure the
humidity level is constantly at the right
level. The default humidity level of the
auto mode is set at 50RH%, but you can
change it to the humidity level you need
under the auto mode. Next time when
you switch on the humidifier, it will
remember your last set humidity level,
unless you have removed the plug from
the wall socket. In this case the default
humidity level is set at 50RH% again.
1
Press the speed button
the auto mode (fig. j).
» The AUTO speed light goes on.
Tip
•
If the desired humidity level is reached,
the humidifier changes to a lower fan
speed automatically.
•
In AUTO mode, the fan speed changes
between and .
Manual
You can manually select the desired fan
speed.
1
Press the speed button
more times to select the desired fan
speed (AUTO,
» The selected fan speed light
•
If the desired humidity level is reached,
you can select a lower fan speed.
However, if the desired humidity level is
not reached, you can select a higher fan
speed to humidify the air more quickly.
Sleep mode
to select
In sleep mode, the humidifier operates
quietly with dimmed light for your
undisturbed sleep.
1
Press the speed button
more times to select sleep mode
(fig. l). In sleep mode, only the
speed
2
To change to another fan speed,
simply press the speed button
again.
•
Sleep mode only works at speed
•
In sleep mode, the red indicator does
not blink, but remains on when the
water level gets low.
•
In sleep mode, you can only set the
timer; the humidity level cannot be set,
and the humidity light is off.
, or
goes on.
Tip
light is on.
Note
once or
) (fig. k).
once or
.
EN
7