Publicité
Les langues disponibles
Les langues disponibles
NOTE
Once the Exhaust Hose assembly and Adjustable Window Slider are prepared, choose from one of
the following two installation methods.
Foam seal B
(Adhesive type-shorter)
Foam
seal A
(Adhesive
type)
Window
Window
slider B
slider A
(if required)
Foam seal C
(Non-adhesive type)
Security Bracket
2 Screws
User Manual
Type 1: Hung window installation
1.
Cut the adhesive foam seal A and B strips to the proper lengths,
and attach them to the window sash and frame as shown.
2.
Insert the window slider assembly into the window opening.
3.
Cut the non-adhesive foam seal C strip to match the width of
the window. Insert the seal between the glass and the window
frame to prevent air and insects from getting into the room.
4.
If desired, install the security bracket with 2 screws as shown.
5.
Insert the window slider adaptor into the hole of the window
slider.
Page 13
Publicité
