Kinetico Water Systems SMF Serie Guide D'utilisation page 15

Issue: Leak between fittings and filter head
Option 1:
Option 2:
Kinetico SMF Series Water Filtration System
1. Remove and reinsert cartridge to verify that it is
installed correctly. When viewed from above, white
locking tabs on cartridge should be visible in four
openings on filter head.
2. Gently remove leaking fitting.
3. Apply additional food grade lubricant to o-ring and
reinsert fitting.
4. Reinsert retainer clip by pushing down into position.
1. Remove cartridge, following changeout instructions.
2. Inspect o-ring for damage. If needed, replace with a
new lubricated o-ring.
3. If o-ring is not damaged, apply additional food grade
lubricant.
4. Re-insert cartridge.
15