Publicité
Les langues disponibles
Les langues disponibles
Shed Assembly/Doors
Stand right door (M) upright with three hinge mounts
facing right. Slide one metal hinge plate (II) up onto each
hinge mount. Rotate hinges to outside of door.
m
Secure each metal hinge plate with one screw (00) and
one locking nut (PP).
Repeat Steps 27-28 for left door (N).
Note: For clarity, illustration is shown with roof removed.
28
[11
With metal hinge plates in open position, slide one hinge
over each hinge receptacle on inside of right front panel.
Note: For clarity, illustration is shown with roof removed.
7
Note: Use a rubber mallet if necessary.
Insert two screws (CCC) into right latch plate (XX) and
through right door. While holding plate in place on exterior
of door, secure each screw with two washers (AAA) and
two locking nuts (BBB). - DO NOT OVERTIGHTEN-
24
Publicité
