Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
1. Place the range hood carefully under the kitchen cabinet without damaging the damper kit.
2. Align the hood with the pre-drilled holes.
3. Loosely fasten the range hood mounting screws but DO NOT fasten screws all the way. Hang the
range hood on the screws and tighten them by hand.
4. If venting is on top, connect the duct to the range hood.
5. Make sure the main power supply is disconnected, then connect wires into the junction box.
6. Install the filters. Turn on electricity at the main electrical panel. Check the operation of the range
hood.
Hood may have very sharp edges. Please wear protective
gloves if it necessary to remove any parts for installation,
SEVERE INJURY
cleaning or service.
Rorating fan can cause severe injury.
Stay clear of fan when motor is running.
ELEGANCECANADA.CA
11
Publicité
Table des Matières
