Publicité
Les langues disponibles
Les langues disponibles
Starting signal reception
As soon as the base station is supplied with current,
all of the indicators on the display will fade in for a
brief moment. Furthermore, the display is briefly lit
up and a beep sounds.
As soon as the signal has been received with
sufficient strength, the corresponding data and the
radio-tower symbol will be shown on the display.
This process can last a few minutes.
From now on, the weather station automatically
switches to receiving-mode multiple times each
night. During this process, the displayed time is
compared with that received from the time signal
transmitter and, if necessary, corrected.
If no sufficiently strong signal has been received,
the base station aborts the receiving process after a
few minutes and the radio-tower symbol goes out. The
receiving process is started again at a later point in time.
You can also restart radio reception manually by
pressing the + button.
Weather Station with Wireless Outdoor Sensor WS 2136-x
Kurzanleitungen WS 2136-x DE EN FR.indb 9
Kurzanleitungen WS 2136-x DE EN FR.indb 9
requires this time to collect all weather data
and to receive radio signals from the time signal
transmitter.
The device then switches to receiving-mode,
during which the number of radio waves
indicates the quality of the reception: The
more radio waves shown on the display, the
better is the reception.
9
27.10.2021 10:54:28
27.10.2021 10:54:28
Publicité
