Publicité
Les langues disponibles
Les langues disponibles
Problem
Grease deposits in the dish-
washer.
The dishes are not dry enough.
30
Possible causes
Low temperature programs
have been selected for a pro-
longed period.
The Automatic door opening
setting has not been activated.
The dishwasher is not fully
loaded.
Rinse aid needs topping up or
dosage is set too low.
The setting TAB is activated and
all-in-one detergent with insuffi-
cient drying effect is being used.
Action
Select a program with a high
temperature to dissolve grease
on very dirty dishes, such as In-
tensive 70°. Or run a self-clean-
ing program. See Self-clean in
the chapter Using the dishwash-
er.
Activate the Automatic door
opening setting. See the
chapter Settings.
Fully load the dishwasher.
Top up with rinse aid or in-
crease the rinse aid dosage
setting.
Switch all-in-one detergents or
deactivate the TAB setting and
top up with salt and separate
rinse aid. See Rinse aid in the
chapter Settings.
Publicité
