Publicité
Les langues disponibles
Les langues disponibles
Error Codes
When an error occurs in the appliance, the display will show the corresponding error code as shown in
the list below. Please contact the local authorised service centre.
E1
Temperature sensor failure inside the fridge compartment
E2
Temperature sensor failure inside the freezer compartment
E3
Temperature sensor failure inside the chill compartment
E5
Failure of freezing and defrosting sensors
E6
Communication failure
E7
Ambient temperature sensor failure
Using the water dispenser
The water dispenser allows you to get chilled water without opening the fridge compartment door.
Before first use
Before using the water dispenser for the first time, remove and clean the water tank located inside the
fridge compartment.
1.
Lift the water tank out of the fridge compartment. Open the water tank cover and then clean the
water tank and cover in warm soapy water. Rinse thoroughly.
2.
After cleaning, attach the cover to the water tank and then replace the water tank back on the fridge
door. Attach the steell wire back to the water tank cover.
3.
Clean the dispenser pad outside the fridge door.
Firstly, remove the steel wire from the water tank cover.
Publicité
