Publicité
Les langues disponibles
Les langues disponibles
CARE & MAINTENANCE
CLEANING
•
Unplug the appliance before cleaning or servicing.
•
Clean the cabinet with a lukewarm damp cloth and
neutral detergent. Dry the cabinet with a lint-free dry
cloth.
•
Do not use gasoline, paint thinner or other chemicals to
clean the appliance.
•
Do not wash the appliance directly under a tap or using a
hose. It may cause electrical damage.
AIR FILTERS
The air filter should be cleaned every two weeks to ensure
efficient performance. In households with animals, the air
filters may need to be cleaned more often and the external
grills may need to be wiped to prevent blocked air flow.
To access the filter:
1. Hold the exhaust hose, push it backward slightly and then
lift it up.
2. Remove the filter.
1
LONG-TERM STORAGE
1. Drain all water from the appliance.
2. Run the appliance on Fan mode for half a day in a warm
room to dry the inside of the appliance and prevent mold
formation.
3. Turn off the appliance and unplug it, wrap the cord and
bundle it with tape.
4. Remove the batteries from the remote control.
5. Clean the air filters and reinstall them.
6. Store the appliance in a cool, dark place. Prolonged
exposure to direct sunlight or extreme heat can shorten the
lifespan of the appliance.
2
DISPOSAL
This appliance should not be treated as regular household
waste. Check for local regulatory compliance regarding the
approved and safe disposal of this appliance.
ERROR CODES
P1 - water tray is full - attach drain hose and drain excess
water
EC52: outdoor tube temperature T3 sensor failure
EC54: outdoor exhaust temperature sensor failure
EH61: indoor tube temperature T2 sensor failure
If any other error code appears on the display, unplug the air
conditioner and allow it to sit undisturbed for 5 minutes. If the
error code persists when the unit is plugged back in, please
contact consumer service.
18
Publicité
