Changing The Led Light; Power Supply - La Sommeliere LS20 Mode D'emploi

⑦ When you hear a sound like water flowing.
A sound like water flowing is the wine cooler flowing. It does not indicate a malfunction.
⑧ When the cabinet's side panel heats up.
The side panel of the cabinet will heat up when the door is opened or closed frequently.
when starting the unit and when the unit operates in summer with high ambient outside temperature. In such
case, do not touch the panel, it results from the dissipation of the heat from inside the cabinet, and it does not
mean that something is wrong with the wine cooler.

Changing the LED light

Warning!
There is a risk of electric shocks! Before changing the light bulb, switch off the appliance and unplug it, or pull
the fuse or the circuit breaker.
LED Light Board data: 220~240 V, max. 2W;
To switch off the appliance;
Unplug the mains plug.
Undo the screw.
Put down the LED Light Board cover .
Change the defective light bulb.
Refit the LED Light Board cover and the screw.
Put the wine cooler back into operation.

Power Supply

The wine cooler is only applied with power supply of single phase alternating current of 220-240Ⅴ～50Hz.lf
fluctuation of voltage in the district user is of so large that the voltage exceeds the above scope, for safety sake, be
sure to apply A.C. automatic voltage regulator to the wine cooler. The wine cooler must employ a special power
socket instead of common one with other electric appliances. Its plug must match the socket with ground wire.
Caution :do not use extension cord.
Power Line Cord
The cord should be neither lengthened nor folded into coil during operation .Moreover, it is forbidden that cord is
kept close onto the compressor at the back of the wine cooler, the surface temperature of which is quite high
when operating. Touching with it would deactivate the insulation or cause leakage for electricity.
Moving
When fixed or moved, the refrigerator can nor be set horizontally or declined to more than 45°or upside-down.
20