Bosch 06014A1100 Notice Originale page 16

16 | English
LEDs
3× continuous green light
2× continuous green light
1× continuous green light
1× flashing green light
Operation
Starting Operation
Inserting the Battery
Push the charged battery pack (1) into the battery holder until it clicks into place.
Switching On and Off
To switch on the cordless worklight, press the on/off switch (4).
To switch off the cordless worklight, press the on/off switch (4) again.
Practical Advice
Utility hook (see figure A)
You can use the utility hook (5) to attach the cordless worklight to an object.
Swivelling the lamp head (see figure B)
The lamp head (3) can be swivelled in six different settings to suit the application.
Examples of applications are:
– Room lighting
– Glare-free workplace lighting
– Floor lighting
Maintenance and Service
Maintenance and Cleaning
Remove the batteries from the worklight before carrying out any work on the
u
worklight (e.g. assembly, maintenance, etc.) as well as when transporting and
storing the worklight. There is risk of injury from unintentionally pressing the on/off
switch.
1 609 92A 5X5 | (08.10.2021)
Capacity
40−60 %
20−40 %
5−20 %
0−5 %
Bosch Power Tools