3M S-200 plus Manuel D'instructions page 92

An
Please read this User Instruction and Reference Leaflet in conjunction with
the appropriate 3M™ Facepiece or 3M™ Filter User Instruction where you
will find information on:
Approved combinations of 3M™ Face masks and 3M™ Filters
^ Particular attention should be given to warning statements where
indicated.
UNPACKING
c) Belt
d) Overflow Valves
SYSTEM DESCRIPTION
Dual Mode
replacement of filters in this mode will be found in the Filter and Face Piece
Supplied Air Mode
^ WARNING
professional or 3M representative on the Tech Assist Helpline 3M
Use this respirator system strictly in accordance with all instructions:
contaminants or when concentrations of contaminants are unknown or
always ensure that at least minimum flow conditions to the face piece
levels at the ear. Hearing protection should be made available as
required.
should be equipped with an appropriately rated and adjusted pressure
systems
contaminated area immediately and under no circumstance attempt to
^
92