Publicité
Les langues disponibles
Les langues disponibles
EN
TECHNICAL DATA
Parameter description
Parameter value
Product name
ENGINE STAND
Model
MSW-MS-680
Dimensions [mm]
895x825x890
Weight [kg]
36,5
Capacity [T]
0,68
Tilt degree [°]
5
Mounting plate
250x150x15
dimensions [mm]
Maximum mounting span
[mm]:
825
Width
890
Height
1. GENERAL DESCRIPTION
The user manual is designed to assist in the safe and
trouble-free use of the device. The product is designed
and manufactured in accordance with strict technical
guidelines,
using
state-of-the-art
technologies
components. Additionally, it is produced in compliance
with the most stringent quality standards.
DO NOT USE THE DEVICE UNLESS YOU HAVE
THOROUGHLY READ AND UNDERSTOOD THIS
USER MANUAL.
To increase the product life of the device and to ensure
trouble-free operation, use it in accordance with this user
manual and regularly perform maintenance tasks. The
technical data and specifications in this user manual are
up to date. The manufacturer reserves the right to make
changes associated with quality improvement. The device
is designed to reduce noise emission risks to a minimum,
taking into account technological progress and noise
reduction opportunities.
LEGEND
The product satisfies the relevant safety
standards.
Read instructions before use.
The product must be recycled.
WARNING! or CAUTION! or REMEMBER!
Applicable to the given situation (general
warning sign).
Wear foot protection.
ATTENTION! Hand crush hazard!
PLEASE NOTE! The drawings in this manual are for
illustration purposes only and in some details may
differ from the actual machine.
The original operation manual is in German. Other
language versions are translations from German.
6
U S E R M A N U A L
2. USAGE SAFETY
ATTENTION! Read all safety warnings and all
instructions. Failure to follow the warnings and
instructions may result in electric shock, fire and/or
serious injury or even death.
The terms "device" or "product" are used in the warnings
and instructions to refer to ENGINE STAND.
2.1. SAFETY IN THE WORKPLACE
a)
Make sure the workplace is clean and well lit. A messy
or poorly lit workplace may lead to accidents. Try
to think ahead, observe what is going on and use
common sense when working with the device.
b)
If you are unsure about whether the product is
operating correctly or if you find damage, please
contact the manufacturer's service centre.
c)
Only the manufacturer's service centre may make
repairs to the product. Do not attempt to make repairs
yourself!
d)
Children or unauthorised persons are forbidden to
enter a work station. (A distraction may result in loss
of control over the device).
e)
Regularly inspect the condition of the safety labels. If
the labels are illegible, they must be replaced.
f)
Please keep this manual available for future reference.
and
If this device is passed on to a third party, the manual
must be passed on with it.
g)
Keep packaging elements and small assembly parts in
a place not available to children.
h)
Keep the device away from children and animals.
i)
If this device is used together with another equipment,
the remaining instructions for use shall also be
followed.
REMEMBER! When using the device, protect children
and other bystanders.
2.2. PERSONAL SAFETY
a)
Do not use the device when tired, ill or under the
influence of alcohol, narcotics or medication which
can significantly impair the ability to operate the
device.
b)
The device can be handled only by physically fit
persons who are capable of handling it, properly
trained, familiar with this manual and trained within
the scope of occupational health and safety.
c)
When working with the device, use common sense
and stay alert. Temporary loss of concentration while
using the device may lead to serious injuries.
d)
Use personal protective equipment as required
for working with the device, specified in section 1
(Legend).
The use of correct and approved personal protective
equipment reduces the risk of injury.
e)
Do not overestimate your abilities. When using the
device, keep your balance and remain stable at all
times. This will ensure better control over the device
in unexpected situations.
f)
The device is not a toy. Children must be supervised
to ensure that they do not play with the device.
2.3. SAFE DEVICE USE
a)
When not in use, store in a safe place, away from
children and people not familiar with the device who
have not read the user manual. The device may pose
a hazard in the hands of inexperienced users.
Rev. 18.03.2021
b)
Keep the device in perfect technical condition. Before
each use check for general damage and especially
check for cracked parts or elements and for any other
conditions which may impact the safe operation of the
device. If damage is discovered, hand over the device
for repair before use.
c)
Keep the device out of the reach of children.
d)
Device repair or maintenance should be carried out by
qualified persons, only using original spare parts. This
will ensure safe use.
e)
When transporting and handling the device between
the warehouse and the destination, observe the
occupational health and safety principles for manual
transport operations which apply in the country where
the device will be used.
f)
Clean the device regularly to prevent stubborn grime
from accumulating.
g)
The device is not a toy. Cleaning and maintenance may
not be carried out by children without supervision by
an adult person.
h)
It is forbidden to interfere with the structure of
the device in order to change its parameters or
construction.
i)
Keep the device away from sources of fire and heat.
j)
Do not overload the device.
k)
Do not wear loose clothing or jewellery. Keep hair,
clothes and gloves away from moving parts. Loose
clothing, jewellery or long hair may get caught in
moving parts.
l)
Use the device only on a firm, level surface with
a gradient of not more than 3 °.
m)
Fasten the device to the engine only in places
provided by its manufacturer and / or using dedicated
adapters.
n)
Before mounting the engine and while working on
it, lock the rotary mechanism and the wheels of the
device.
o)
WARNING! An unevenly distributed center of gravity
can cause a sudden, involuntary rotation of a rotary
mechanism after it is unlocked. Unlock it slowly and
with caution.
ATTENTION! Despite the safe design of the device
and its protective features, and despite the use of
additional elements protecting the operator, there
is still a slight risk of accident or injury when using
the device. Stay alert and use common sense when
using the device.
3. USE GUIDELINES
The product is intended for mounting and bearing car
engines and facilitating work on their repairs.
The user is liable for any damage resulting from
unintended use of the device.
Rev. 18.03.2021
EN
3.1. DEVICE DESCRIPTION
3
4
2
5
1
6
7
8
1.
Lever for turning
2.
Lever mounting location
3.
Pin
4.
Engine mounting plate
5.
Mounting adapters
6.
Fixed wheels
7.
Swivel wheel
8.
Swivel wheel with a brake
3.2. PREPARING FOR USE
APPLIANCE LOCATION
THE AMBIENT TEMPERATURE must not exceed 45°C
and the relative humidity should not exceed 85%. Keep
the device away from any hot surfaces. The device should
always be used when positioned on an even, stable,
clean, fireproof and dry surface, and be out of the reach
of children and persons with limited mental and sensory
functions.
ASSEMBLING THE APPLIANCE (Assembly drawing)
ATTENTION! This product's exploded view can be
found on the last pages of the operating instructions
(pp. 24).
Part
Name
Amount
no.
1
Pin
1
Hexagon bolt M12x55 mm (class
2
4
8.8)
3
Mounting plate
1
4
Mounting adapters
4
5
Flat washer M12
15
6
Spring washer M12
15
7
Nut M12
15
8
Lever
1
9
Lever handle
1
7
Publicité
