CHANGING THE WATER FILTER
The "Filter Indicator" light lets you know when it is time to change your water filter cartridge. To
give you preparation time to get a new filter, the red light will come on just before the capacity
of the current filter runs out. Changing the filter on time provides you with the freshest, cleanest
water from your fridge.
1. Take a new water filter and put a month indicator sticker on the filter as shown.
The date on the sticker must be six months from the current date. For example, if you are replacing
the water filter in March, put the "SEP" (September) sticker on the filter to remind you to replace in
September. Normal filter life is about every 6 months.
2. Remove the new filter's protective cap and remove the old filter.
3. Position and insert the new filter into the filter housing.
Slowly turn the water filter clockwise to align with the printing mark on the cover, locking the filter in
position. Make sure to align the water filter label mark with the center of cover filter printing as illustrated.
Remember, do not over-tighten.
Cover filter
4. Once you have completed this process, press and hold the Ice / Water button for 3 seconds to reset the
filter schedule.
5. Lastly, run about six glassfuls of water through water dispenser to clean the water supply system.
Make sure that water flows clearly again before drinking.
[_Be
sure to flush the dispenser thoroughly otherwise water may drip from the dispenser.
This means that there is still air in the line.
Do NOT use the water or ice dispenser without a water filter cartridge because the water line may
become blocked.
Ordering replacement
Water Filter
For replacement
waster filter you can visit your local service center or contact the Samsung
Parts distributor.
Be sure the replacement
water filter has the SAMSUNG
logo on the box and the water filter.
Link: http://www.samsungparts.com
DA68-O1812G.indb
34
2009.8.10
9:9:54AM