Publicité
Les langues disponibles
Les langues disponibles
REATTACHING THE REFRIGERATOR
DOORS
4. Connect
the water line (_)
and then insert a
clip on the coupler
with pulling tube.
Connect
the one connector(G
) on left side
door and two connectors
(_)
at each side
of the top cap.
_The
clip is enveloped inside of the top cap.
Red
Clip
Z_
The water line (l_) must be fully inserted to the marked line to prevent
CAUTION
water leakage from the dispenser.
Line
5. Position the Top Table(_l)
in place.
With a Philips head screwdriver,
insert and tighten the 3
screws into the Top Table. With the door opened,
reinsert the
Top Table cap(Ill)
and close the doors.
_When
reattaching the top table, make sure that the
wires are not pressed or damaged by the top table.
Sett _g Up 13
DA68-O1812G.indb
13
2009.8.10
9:7:58_AM
Publicité
