Publicité
Les langues disponibles
Les langues disponibles
2. Disconnect two connectors
([_) at
each side of the top cap and the one
connector(G
) on left side door.
Remove
the tube (1_) with pressing the dark gray
color part ([_) of the water line coupler.
Z_
If a red clip is on the coupler, it must be removed
CAUTION before removing the tube.
1
Remove the three hex head bolts(G ) attached
to the upper left and right door hinges with a
Wrench(10mm).
With a Philips head screwdriver,
remove the ground
screw(G
) attached
to the upper left and right door
hinges.
Remove the upper left and right door hinges(G
) .
®
4. Lift the door straight up to remove.
1
With a Philips
head screwdriver,
remove the two
screws(_)
attached
to the lower left and right
door hinges.
With an Allen Wrench(5mm),
remove the two hex
head bolts(G
) attached
to the lower left and right
door hinges.
Remove
the lower left and right door hinges([_).
10 setting up
DA68-O1812G.indb
10
2009.8.10
9:7:4C_AM
Publicité
