Publicité
Les langues disponibles
Les langues disponibles
rono D
ICE PRODUCTION
Normal Use
To fill ice bucket to maximum capacity after installation, make sure to do the
following steps.
1. Allow your refrigerator to operate and cool down for 24 hours (or 1 full day).
2. Waiting 24 hours will allow your ice maker to cool properly.
3. Dispense 4 to 6 ice cubes into the glass.
4. After 8 and 16 hours, dispense a full glass of ice at each time.
Whenever all ice is used at one time, the above step 3 and 4 must be repeated (before dispense the first
4 to 6 ice cubes, it needs waiting 8 hours). This will replenish the ice cubes and ensure maximum ice
production.
/_
Test button
CAUTION In case ice doesn't come out, pull out the ice bucket and press test button
located on the right side of ice maker.
®
Please wait 1 second before removing the cup after dispensing water to
prevent spills. Do not pull out the lever dispenser after taking out ice or
water. It comes back automatically. Ice is made in cubes. When you select
"Crushed", the icemaker grinds the ice cubes into crushed ice.
Z_
When you dump the ice from the ice bucket, you should press the
CAUTION dispenser lever once with 'ICE CUBED' or 'CRUSHED' function ON to
get new ice faster after replacing the ice bucket in the refrigerator.
/ ii i,'_ii
DA68-01812G.indb
25
2009.8.10
9:8:47
AM
Publicité
