Ego Power+ HT2600 Manuel De L'opérateur page 8

 If operating a machine in a damp location is unavoidable, use a GFCI protected
supply. Use of a GFCI reduces the risk of electric shock .
PERSONAL SAFETY
 Stay alert, watch what you are doing and use common sense when operating
a machine. Do not use a machine while you are tired or under the influence of
drugs, alcohol or medication. A moment of inattention while operating machines
may result in serious personal injury .
 Use personal protective equipment. Always wear eye protection. Protective
equipment such as a dust mask, non-skid safety shoes, hard hat or hearing
protection used for appropriate conditions will reduce personal injuries .
 Prevent unintentional starting. Ensure the switch is in the off-position before
connecting to power source and/or battery pack, picking up or carrying the
machine. Carrying machines with your finger on the switch or energizing machines
that have the switch on invites accidents .
 Remove any adjusting key or wrench before turning the machine on. A wrench
or a key left attached to a rotating part of the machine may result in personal injury .
 Do not overreach. Keep proper footing and balance at all times. This enables
better control of the machine in unexpected situations .
 Dress properly. Do not wear loose clothing or jewelry. Keep your hair and
clothing away from moving parts. Loose clothes, jewelry or long hair can be
caught in moving parts .
 If devices are provided for the connection of dust extraction and collection
facilities, ensure these are connected and properly used. Use of dust collection
can reduce dust-related hazards .
 Do not let familiarity gained from frequent use of machines allow you to
become complacent and ignore machine safety principles. A careless action can
cause severe injury within a fraction of a second .
MACHINE USE AND CARE
 Do not force the machine. Use the correct machine for your application.
The correct machine will do the job better and safer at the rate for which it was
designed .
8
56V LITHIUM-ION CORDLESS HEDGE TRIMMER — HT2600/HT2600-FC