Publicité
Les langues disponibles
Les langues disponibles
DIMENSION GUIDE
Double Ovens Installed in Cabinet
F
E
30" (76.2 cm) models
A. 30" (76.2 cm) minimum cabinet width
B. 1" (2.5 cm) top of cutout to bottom of upper cabinet door
C. 14
/
" (37.5 cm) bottom of cutout to floor is recommended.
3
4
7.5"-14
/
" (19.1 cm-37.5 cm) bottom of cutout to floor is acceptable.
3
4
D. 28
/
" (72.4 cm) minimum cutout width
1
2
E. 1
/
" (3.8 cm) minimum bottom of cutout to top of cabinet door
1
2
F. 501/4" (127.6 cm)* recommended cutout height
G. 24" (60.7 cm) cutout depth
*NOTES: The cutout height can be between 50" and 52
(127 cm and 132.6 cm) for double ovens.
*NOTES: Contact service to get tall shield for cutouts greater
than 50
/
" (128 cm) to enhance installation.
3
8
B
D
G
C
Cabinet Dimensions - Double Ovens, Flush
Installations
NOTE: This is an alternate option to install your product in
the cabinet and obtain a flush look. For standard installation,
refer section "Product Dimensions - Double Ovens, Standard
Installation."
NOTE: On single and double oven models installed above a
warming drawer or for ovens installed using flush installation
cabinetry, a deflector kit must be installed. See the "Online
Ordering" section of your Quick Start Guide for information on
ordering.
A 25
/
" (64.4 cm) minimum cutout depth is required.
3
8
Top and bottom gaps will be 1/8" (0.3 cm) gap above and below
the product. Top and bottom gaps not required for installation.
Exposed areas of the cabinet should be finished to match.
Double Ovens Installed in Cabinet
F
/
"
3
16
30" (76.2 cm) models
A. 3/4" (1.9 cm) top cleat*
B. 30
/
" (76.8 cm) minimum width of flush inset cutout
1
4
C. 28
/
" (73.3 cm) minimum width of opening
7
8
D. 52" (132.1 cm) minimum height of flush inset cutout
E. 51
/
" (130.1 cm) recommended cutout height
1
14
F. 11/16" (1.7 cm) side cleat*
G. 1/4" (0.6 cm) recommended with foot. 15/16" to 1
(2.2 cm to 2.9 cm) allowable without foot*
H. Recommended junction box location
I. 4
/
"-32" (11.7-81.3 cm) bottom of cutout to floor
5
8
J. 25" (63.5 cm) minimum depth of cutout
*Cleats and spacers must be recessed 1
front of the cabinet.
FRONT VIEW
SIDE VIEW
A
B
C
D
E
F
G
G
J
H
H
I
3
3 of 12
/
"
1
8
/
" (3.5 cm) from the
8
Publicité
