Publicité
BY UNITED STATES STOVE C
O
-
FOR CUSTOMER SERVICE CALL: 800-750-2723 EXT 5050
TOP CONTROL MOUNT INSTALLATION
1.
Pull the factory installed 5 Pin Main Wiring Harness,
7 Pin Com Cabel, and 4 Pin Wiring Harness, (not
shown) out of the top of the stove.
5 Pin Main Wiring Harness
7 Pin Com Cable
2. Unpack the top mount controls and ensure that all
wires are securely attached.
3. Connect the factory installed 5 Pin Main Wiring
Harness to the top right-hand corner of the control
panel. Connect the factory installed 7 Pin Com Cabel
to the control panel directly below the 5 Pin Main
Wiring Harness. Connect the 4 Pin Wiring Harness to
the bottom left-hand corner of the control panel.
4 Pin Fuel Sensor
© 2024 United States Stove Company
5 Pin Main Wiring Harness
7 Pin Com Cable
4. Secure the control panel to the top of the stove with
two sheet metal screws.
4
INSTALLATION
Publicité
