Publicité
Les langues disponibles
Les langues disponibles
8
g
Reverse the
upper hinge assembly and
hinge filler.
g
• Carefully lift
the upper hinge assembly-
inner top lock rod (on the left) out of the
outer door frame. Rotate the
hinge assembly - inner top lock rod 180
degrees and install it on the upper right
side of the outer door. You will need to
press firmly to install the hinge assembly.
k
• Now rotate the
and install it on the upper left side of the
door.
9
i
Reinstall the
top lock rod holder using 2
screws removed in step 6.
10
h
Reverse the
lower hinge bracket and
hinge assembly.
1) Remove the screw from the
hinge bracket (on the right) and lift the
k
g
upper
hinge filler 180 degrees
j
h
lower
hinge bracket out. Set it aside. Remove
the two screws from the
assembly on the bottom left and lift the
hinge assembly out.
j
2) Rotate the
lower hinge assembly 180
degrees and install it on the right side
using the two screws removed in a
previous step.
h
3) Flip over the
lower hinge bracket and
release the tabs on the back locking the
e
hinge filler to the hinge bracket.
4) Rotate the hinge filler 180 degrees and
snap it back onto the front of the hinge
bracket facing in the opposite direction.
5) Mount the lower hinge bracket and the
filler on the left side of the door with the
screw removed in a previous step.
INSTALLATION
17
j
lower hinge
Publicité
