Dustcontrol DC Tromb Serie Notice D'utilisation page 14

Power cord
Never pull the machine by the power cord. Keep the power cord away from heat and sharp objects. Regularly inspect the power
cord.
The machine must not be used if the power cords or contacts are damaged.
If the power cord is damaged, it must be replaced by Dustcontrol or a Dustcontrol authorized service center.
Important safety precaution
Care and maintenance
Keep the machine clean and free from dust deposits. Ensure that the suction hose and all seals are intact and undamaged. Keep
the carrying handles dry and free from oil and grease.
Inspection
Regularly check the device for damage and wear. Any damage must be rectified by a Dustcontrol authorized service center.
Functional description
The dust extractor uses negative pressure (suction) to force the air through a suction cover/nozzle, hose system, pre-separator
and dust separator. Coarse separation is carried out in the machine's cyclone, providing very effective separation of any coarse
dust. Fine dust is separated in the units filter. Reverse-pulse filter cleaning ensures extended filter life. The machine is fitted with a
HEPA filter.
DC Tromb 400 is used for spot extraction (with maximum throttling Ø 15 mm) in many contexts e.g. when grinding, welding,
personal clean-up and cleaning. The DC Tromb 400 is powered by two 1-phase, 2-stage fans.
The dust extractor has the following discharge options:
c – Plastic bag: The extracted and separated material is collected in a plastic bag that can be detached in one simple operation.
The material can easily be recycled or disposed of.
a - Container: A cylindrical container for collection of separated material.
L – Longopac: The machine is equipped with a flexible bag system, in which the dust is collected in a closed system.
Technical data
HxWxL [mm]
Weight [kg]
Inlet [mm]
14
DC Tromb 400c
1390 x 560 x 700
46
Ø76
DC Tromb, Art.nr. 9480-H
DC Tromb 400a DC Tromb 400L
1390 x 560 x 700 1390 x 560 x 700
50 48
Ø76 Ø76