Axis Q1635 Guide D'installation page 16

AXIS Q1635 Network Camera
Product Temperature
AXIS Q1635 0 °C to 55 °C
(32 °F to 131 °F)
I/O connector
4–pin terminal block for:
• 0 V DC (-)
• Auxiliary power (DC output)
• Digital Input
• Digital Output
Function Pin
1
0 V DC (-)
2
DC output
3–
Configurable
4
(Input or
Output)
www.a1securitycameras.com email: sales@a1securitycameras.com
Notes
Can be used to power auxiliary equipment.
Note: This pin can only be used as power out.
Digital input – Connect to pin 1 to activate,
or leave floating (unconnected) to deactivate.
Digital output – Connected to pin 1 when
activated, floating (unconnected) when
deactivated. If used with an inductive load,
e.g. a relay, a diode must be connected in
parallel with the load, for protection against
voltage transients.
Available from A1 Security Cameras
Humidity
10-85% RH (non-condensing)
1
2 3 4
16
Specifications
12 V DC
Max load = 50 mA
0 to max 30 V DC
0 to max 30 V DC, open
drain, 100 mA