TOOLS AND PARTS
Gather the required tools and parts before starting installation.
Tools needed:
Pliers that open to 1
/
"
9
16
(39.5 mm)
Adjustable or open-end
wrench 9/16" (14 mm)
Tape measure or ruler
Parts supplied
(located in the washer basket):
Drain hose form
Parts needed
(Not supplied with washer)
Water inlet hoses (2)
INSTALLATION REQUIREMENTS
Flashlight (optional)
4" min
(102 mm)
Wood block
Level
Cable Tie
:
Flat inlet hose washers (4)
To order, please refer to the phone number or website on the
back page of your "Use and Care Guide."
8212656RP
10 ft. (3.0 m) Inlet hose, Black EPDM (2 pack)
■
8212641RP
5 ft. (1.5 m) Inlet hose, Black EPDM (2 pack)
■
8212646RP
4 ft. (1.2 m) Inlet hose, Black EPDM (2 pack)
■
8212545RP
5 ft. (1.5 m) Inlet hose, Red and Blue EPDM
■
(2 pack)
8212487RP
5 ft. (1.5 m) Nylon braided inlet hose (2 pack)
■
8212638RP
6 ft. (1.8 m) Nylon braided inlet hose, space
■
saving 90° elbow, hypro-blue steel couplings
(2 pack)
8212637RP
6 ft. (1.8 m) Inlet hose, Black EPDM, space
■
saving 90° elbow, hypro-blue steel couplings
(2 pack)
Alternate parts
(Not supplied with washer)
Your installation may require additional parts. To order, please
refer to the phone number or website on the back page of your
"Use and Care Guide."
If you have:
You will need:
Laundry tub or
Sump pump system (if not already
standpipe taller
available)
than 96" (2.4 m)
1" (25 mm)
2" (50 mm) diameter to 1" (25 mm)
diameter standpipe
diameter Standpipe Adapter Kit,
Part Number 3363920 and
Connector Kit, Part Number 285835
Overhead sewer
Standard 20 gal. (76 L) 39" (990 mm)
tall drain tub or utility sink, sump
pump, and connectors (available
from local plumbing suppliers)
Floor drain
Siphon Break Kit,
Part Number 285834
Extension Drain Hose,
Part Number 285863
Connector Kit, Part Number 285835
Drain hose too short
Extension Drain Hose,
Part Number 285863
Connector Kit, Part Number 285835
Lint clogged drain
Drain protector, Part Number 376031
:
3