Installation Requirements; Tools And Parts - Whirlpool NTW5100TQ Mode D'emploi

Gather the required tools and parts before starting installation.
The parts supplied are in the washer basket.
Parts needed (not provided with washer):
Inlet hoses
I
To order:
Call the dealer from whom you purchased your washer.
I
Reference the toll-free number on the front page of the
I
Washer User Instructions.
Visit the website on the front page of the Washer User
I
Instructions.
NOTE: Replace inlet hoses after 5 years of use to reduce the
risk of hose failure. Record hose installation or replacement dates
for future reference.
Parts supplied:
A
A. Beaded tie strap
B. Front leveling feet with nuts (2)
C. Drain hose form
Tools needed for installation:
Adjustable or open end
I
9
wrench ⁄ " (14 mm)
16
Level
I
Wood block
I
2

INSTALLATION REQUIREMENTS

Tools and Parts

Flat washers
I
B C
Ruler or measuring tape
I
9
Pliers that open to 1 ⁄
I
16
(3.95 cm)
Flashlight (optional)
I
Alternate Parts
Your installation may require additional parts. For information on
ordering, please refer to the toll-free phone numbers on the front
page of the Washer User Instructions.
If You Have:
Laundry tub or
standpipe taller
than 96" (2.4 m)
1" (2.5 cm)
diameter
standpipe
Overhead sewer
Floor drain
Water faucets
beyond reach
of ll hoses
"
Drain hose
too short
Lint clogged drain
You Will Need to Buy:
Sump pump system (if not already
available)
1
1 ⁄ " (3.2 cm) diameter to 1" (2.5 cm)
4
diameter standpipe adapter,
Part Number 280130
Standard 20 gal. (76 L) 39" (99 cm) tall
drain tub or utility sink, sump pump, and
connectors (available from local
plumbing suppliers)
Siphon break kit, Part Number 280129;
additional drain hose,
Part Number 3357090
Water ll hoses:
10 ft (3.0 m) Black EPDM,
Part Number 8212656RP
6 ft (1.8 m) Braided Nylon with 90° Elbow,
Part Number 8212638RP
5 ft (1.5 m) Braided Nylon,
Part Number 8212487RP
6 ft (1.8 m) Black EPDM with 90° Elbow,
Part Number 8212637RP
5 ft (1.5 m) Red & Blue EPDM,
Part Number 8212545RP
5 ft (1.5 m) Black EPDM,
Part Number 8212641RP
4 ft (1.2 m) Black EPDM,
Part Number 8212546RP
Kit Part Number 280131
Drain protector, Part Number 367031