Guarantee Conditions - Qlima LK 1051 Manuel D'utilisation

TROUBLESHOOTING
Problem
No air flow
Continuous blowing of fan
Abnormal sound
No evaporation
Air flow direction can not
be controled

GUARANTEE CONDITIONS

4
34
Cause
1.Power is not connected.
2.Power is not turned ON.
3.Body damaged.
Body damaged.
1.Foreign article inside the body.
2.Loose air wheel.
3.Motor defect.
1.Filter of water inlet broken.
2.Water trough was be jamminged
3.Other cause.
Defective front synchronization
motor.
The appliance is supplied with a 24-month guarantee, commencing on the
date of purchase. All material and manufacturing defects will be repaired or
replaced free of charge within this period. The following rules apply:
1. We expressly refuse all further damage claims, including claims for collate-
ral and/or consequential damage.
2. Repairs to or replacement of components within the guarantee period will
not result in an extension of the guarantee.
3. The guarantee is invalidated if any modifications have been made, non-
genuine parts are fitted or repairs are carried out by third parties.
4. Components subject to normal wear, such as filters, batteries, lamps and
heating elements are not covered by the guarantee.
5. The guarantee is valid only when you present the original, dated purchase
invoice and if no modifications have been made to it.
6. The guarantee is invalid for damage caused by neglect and/or by actions
that deviate from those in this instruction booklet.
7. Transportation costs and the risks involved during the transportation of the
appliance or components of the appliance shall always be for the account
of the purchaser
8. Damage caused by not using suitable spare parts is not covered by the gua-
rantee.
To prevent unnecessary expense, we recommend that you always first care-
fully consult the instructions for use. Take the appliance to your dealer for
repairs if these instructions do not provide a solution.
www.qlima.com
Solution
1. Plug the power cable properly.
2. Press the Air Speed key to start.
3.Return to Service Center.
Return to Service Center.
1. Remove rear cover and strainer,
remove foreign articles.
2.Return to Service Center.
3.Return to Service Center.
1.Cleaning the inlet filter.
2.Cleaning the water trough.
3.Return to Service Center.
Return to Service Center.