Qlima LK 1051 Manuel D'utilisation page 32

FUNCTIONS OF ALL BUTTONS
ON/OFF Switch on this button to open the air cooler , with a short sound"BI" signaling the starting of normal
operation. Meanwhile, functions indicators for cooling and swinging(normal wind type) are turned
on automatically. Medium windy from the starting after 3 seconds, it will change to low speed.
To close the air cooler, switch off the "ON/OFF" button. A short sound of "BI" signals stop of all
operation.
MODE The Normal mode is set automatically after opening the air cooler. Pressing this button will switch
the Normal mode to sleep. Pushing it again will switch the sleep mode to Natural. All of the three
types are available for choice. (Remark: When the "Natural" or "Sleep" mode is on, the wind speed
will not be changed).
COOL This function is started automatically after opening the air cooler. To stop cooling function, push the
button. To press it once more will open this function again. (When the cooling function operates,
fans automatically t Remark: urn to low speed 30 seconds).
SWING L/R This function is started immediately after opening the air cooler, shown by the lighted SWING L/R
indicator. Under this condition, the wind board slowly sways form left to right. To stop this function
as well as the indicator, just push this button. Pushing it once more will start the swaying of wind
board once again.
SPEED Push this button to change the speed of wind after starting the air cooler. Wind speed can be chan-
ged from low, medium to high. Indicator for low wind speed turns on when the air cooler works in
low speed. So do medium and high speed indicators.
TIMER The timer function turn on when press this button on standby mode, and can set timer power on
from 1 hour to 7.5 hours by hour. After turn on the machine, press this button to set timer power off
function from 1 hour to 7.5 hours by hour. Release this function can press this button to change the
time and can press "ON/OFF"button directly.
LED The LED display panel light and the control light turn on at the same time when the machine is on.
The LED display panel will turn off automatically after 10 seconds from the unit is off but the control
light will not turn off.
WATER LEVEL The LED light is blue when the tank have water, The Led is red and the machine also make voice
alarm when water is lacking in tank. The water is lacking if the machine is in cooling mode, need to
add water and press cooling button to turn cooling function.
HOW TO CHANGE BATTERY FOR THE CONTROLLER
1: Pull the battery outward.
2: Put in the new battery with the"+"on the top.
3: Put the battery box in thecontroller
CAUTION
1. Use normal power supply. (F.5)
2. Do not place objects on the top of the unit. Do not cover the air outlet when in
use and obstructed of front and back in one meter. (F.6)
3. After filling with water, do not tilt or collide the unit, when you need to move
the unit, push the side surface slowly so as to avoid water splashing out. Do not
overturn the unit in service to prevent accident.
4. The body of the unit may not be place in area with extremely high or low tem-
perature. In hot summer, the water in its water tank is liable to deterioration
4
32
1 1)
2 2)
3