Publicité
Les langues disponibles
Les langues disponibles
FIGURE 4
Install 1/2" Hitch Pin and Clip
for 1-/4" hitch.
Bicycle Loading:
1.
Load inner bicycle first. Pull bail pin and rotate center tube down as illustrated. (Fig 7)
2.
Load bicycle into Wheel Cradles. Adjust cradles to appropriate position. Ensure tire is well supported
at both ends of Wheel Cradles. Tighten cradles to prevent movement. (Fig 8)
3.
Rotate center tube to vertical position and lock with bail pin. Lower Frame Hook assembly down over
bicycle frame as illustrated. (Fig 9)
bi
l f
ill
4.
Apply downward pressure to bicycle and Frame Hook assembly. Tighten Frame Hook assembly and
ensure there is no movement of bicycle.
FIGURE 7
Cequent Performance Products
47774 Anchor Court
Plymouth, MI 48170
Technical Service: (888) 521-0510
ITEM
DESCRIPTION
Receiver Adapter
Use 1/2"
Hitch Pin
t t d (Fi 9)
63134
:
:
Q-Slot 2 Bike Rack
FIGURE 5 & 6
Install 5/8" Hitch Pin and Clip, and
Receiver Adapter for 2" hitch.
FIGURE 8
Page 2 of 12
Use 5/8"
Hitch Pin and clip
For 2"
63134N
Rev A 10-09
Printed in China
Publicité
