Blue Sky Outdoor Living PHPG8919B Manuel Du Propriétaire page 23

STEP 2
Push the control knob in and rotate it
to the pilot position.
NOTE: For initial start or after any
cylinder change, hold the control knob
in for 2 minutes to purge air from the
gas lines.
STEP 3
NOTE: The igniter is battery powered
so you do not need to continuously
push the button. Push and release –
you may have to repeat this process
until the pilot flame is visible.
Push and release the igniter button
until the pilot flame is visible through
the glass tube.
Once the pilot is lit, continue
to depress the control knob for
30 seconds.
If the pilot does not stay lit, repeat
this step.
23 | www.bluesk youtdoorliving.com