Publicité
Les langues disponibles
Les langues disponibles
MAINTENANCE
Grease filters
Replacing the odor/fine dust filter
Lighting
Removing the grease filters
1. Switch off the motor and lighting.
2. Remove the grease filters from the hood by pulling the
special handle.
1. Remove the grease filters.
2. Fit the odor/fine dust filter. Slot the notches of the odor/fine dust
filter in the specially designed opening.
3. Fit the grease filters.
Note!
• The odor/fine dust filter must always be used if the cooker hood is
not ducted.
• Using a odor/fine dust filter creates more sound than when using
the cooker hood with an outlet.
• The odor/fine dust filter's operation is optimal at a lower motor
speed. You should, therefore, avoid using the intensive setting.
• Saturation of the odor/fine dust filter will eventually occur after more
or less prolonged use, depending on the type of cooking and how
frequently the grease filter is cleaned.
• It is necessary to replace the odor/fine dust filter when indicated by
the filter indicator.
• The odor/fine dust filter must be replaced at least every year.
• DO NOT wash or reuse the odor/fine dust filter. Saturated carbon is
not environmentally friendly, change the filter regularly.
This hood is fitted with a light system. This light system has to be
replaced by an authorized technician. Do not attempt to replace it
by yourself.
The lamp in this household appliance is only suitable for
illumination of this appliance. The lamp is not suitable for
household room illumination.
EN 13
Publicité
