Publicité
Les langues disponibles
Les langues disponibles
OPERATION
Cleaning the filters
EN 8
Saturation grease and odor/fine dust filters
The filters should be replaced or cleaned when the filter indicator key is
flashing.
Grease filter
The filter indicator key and speed key 1 will flash after 100 operating
hours.
• The grease filters should then be cleaned.
Odor/fine dust filter
The filter indicator key and speed key 2 will flash after 200 operating
hours.
• The odor/fine dust filter should then be replaced.
Reset the filter indicator
1. Switch off the cooker hood by touching the on/off key.
2. Switch off the lighting by touching the lighting key.
3. Reset the memory: touch and hold speed key 1 for approximately
three seconds.
All keys will flash three times.
If you have a cooker hood with a odor/fine dust filter, you should
activate the odor/fine dust filter indicator.
Switching on the odor/fine dust filter indicator (if necessary)
1. Switch off the cooker hood by touching the on/off key.
2. Switch off the lighting by touching the lighting key.
3. Touch and hold speed key 2 for approximately three seconds until
all keys flash twice.
The odor/fine dust filter indicator is activated.
Switching off the odor/fine dust filter indicator
1. Switch off the cooker hood by touching the on/off key.
2. Switch off the lighting by touching the lighting key.
3. Touch and hold speed key 2 for approximately three seconds until
all keys flash once.
The odor/fine dust filter indicator is deactivated.
Publicité
