GHP Group TT360L Manuel D'utilisation Et De Fonctionnement page 6

Tools Required:
Phillips head screwdriver
The tank collar bracket must be assembled before the heaters can be attached to the propane tank.
1. Align bolt holes in tank collar bracket with bolt holes in mounting plate on heater.
2. Drive-in two machine screws (supplied) into the bolt holes attaching tank collar bracket to mounting plate
on heater. (Fig. 1)
FIGURE 1
PROPANE TANK TOP HEATER
TT360 SERIES HEATER ASSEMBLY
Estimated Assembly Time:
DUAL BURNER MODEL
5 minutes
5
Contents:
Tank Top Heater (1)
Tank Collar Bracket (1)
M4x8 Machine Screws (2)
NEVER LEAVE THE HEATER
UNATTENDED WHILE BURNING!