Digital Control Panel - Bartscher COOL + HOT 1/1 GN Mode D'emploi

Digital control panel

Setup
•
Heating cool products or cooling warm products requires some time, which is why we
recommend choosing one of these two functions for food products to later be properly
prepared (heated or cooled) and served quicker.
•
Connect the unit to a grounded single outlet.
•
Turn the unit on using the ON/OFF switch at the rear of the unit by placing it in the
position marked „
•
For best results, the unit can be pre-heated or pre-cooled.
•
Depending on the type of food product (hot or cold) set the temperature between
°
-5 C and + 75
digital temperature display.
•
When the temperature is set above 40
on, whereas at temperatures 39
comes on.
①
Digital temperature display
②
Cooling mode control light (blue)
③
Warming mode control light (yellow)
④
Raise temperature button
⑤
Lower temperature button
I
".
+
°
C. Press „ " or „
°
C and below the blue cooling mode control light
② ③
①
-
" until the desired temperature is shown on the
°
C the yellow warming control light comes
④
⑤
- 25 -