Publicité
Les langues disponibles
Les langues disponibles
DIMENSION GUIDE
Double Ovens Installed in Cabinet
D
F
G
E
27" (68.6 cm) models
A. 27" (68.6 cm) minimum cabinet width
B. 1" (2.5 cm) top of cutout to bottom of upper cabinet door
C. 14
3
/
" (37.5 cm) bottom of cutout to floor is recommended.
4
7.5"-14
3
/
" (19.1 cm-37.5 cm) bottom of cutout to floor is acceptable.
4
1
D. 25
/
" (64.8 cm) minimum cutout width
2
E. 1
1
/
" (3.8 cm) minimum bottom of cutout to top of cabinet door
2
F. 501/4" (127.6 cm)* recommended cutout height
G. 24" (60.7 cm) cutout depth
*NOTE: The cutout height can be between 50" and 52
(127 cm and 132.6 cm) for double ovens.
*NOTE: Contact service to get tall shield for cutouts greater than
50
3
/
" (128 cm) to enhance installation.
8
B
C
/
"
3
16
Cabinet Dimensions - Double Ovens, Flush
Installations
NOTE: This is an alternate option to install your product in
the cabinet and obtain a flush look. For standard installation,
refer section "Product Dimensions - Double Ovens, Standard
Installation."
NOTE: On single and double oven models installed above a
warming drawer or for ovens installed using flush installation
cabinetry, a deflector kit must be installed. See the "Online
Ordering" section of your Quick Start Guide for information on
ordering.
A 25
/
" (64.4 cm) minimum cutout depth is required.
3
8
Top and bottom gaps will be 1/8" (0.3 cm) gap above and below
the product. Top and bottom gaps not required for installation.
Exposed areas of the cabinet should be finished to match.
Double Ovens Installed in Cabinet
FRONT VIEW
B
D
E
F
G
H
27" (68.6 cm) models
A. 3/4" (1.9 cm) top cleat*
1
B. 27
/
" (69.2 cm) minimum width of flush inset cutout
4
C. 25
7
/
" (65.7 cm) minimum width of opening
8
D. 52" (132.1 cm) minimum height of flush inset cutout
E. 51
1
/
" (130.1 cm) recommended cutout height
4
F. 11/16" (1.7 cm) side cleat*
G. 1/4" (0.6 cm) recommended with foot. 15/16" to 1
2.9 cm) allowable without foot.
H. Recommended junction box location
I. 4
5
/
"-14
3
/
" (11.7-37.5 cm) bottom of cutout to floor
8
4
J. 25" (63.5 cm) minimum depth of cutout
*Cleats and spacers must be recessed 1
front of the cabinet.
SIDE VIEW
A
C
F
G
J
H
I
1
/
" (2.2 cm to
8
3
/
" (3.5 cm) from the
8
3 of 12
Publicité
