Publicité
Les langues disponibles
Les langues disponibles
Remove door(C) from body (B)
ASSEMBLY INSTRUCTIONS
1. Check that the control knob (F) for the gas
supply system is turned to the "OFF" position
before starting any assembly.
2.
Remove door (E) from body (C) . Remove the
cap on the electronic igniter (G) by unscrewing
and slide battery (B) into the battery slot. Make
sure the positive side of the battery faces battery
faces outwards. Screw the electronic igniter cap (G)
over the battery tightly.
place propane gas tank (not included) into the
3.
the metal stand inside of the body (C).
Bond Manufacturing Co., Inc. | Page 6
F
L
H
G
B
Publicité
