Bartscher IK 35dp Mode D'emploi page 30

The buttons or
range of 60 – 240° C at levels of 20° C. The digital display will show t he selected
temperature.
The unit heats dishes and maintains constant temperature. Regulation of power is thus
performed automatically.
NOTE!
If the unit is turned on and no dish for cooking is present or is removed, a repeating
audio signal will sound and the unit will turn itself off after approx. 30 seconds.
Setting time
After selecting the desired mode (power level or temperature), press the button
marked . The number „0" will appear on the digital display and the time control light
will come on.
Using or you may set the time of operation in 5-minute intervals (max. 180
minutes). The time is counted down, and after several seconds the digital display returns
to previous displays.
To check the remaining time, press
When time has run out, an audio signal will sound and the unit will automatically shift into
sensory mode.
NOTE!
When in use, the time may be adjusted at any moment using
function that the unit is equipped with allows for the set power or temperature levels
to remain unchanged.
Any change may be made at any moment. The unit will function in accordance with the
most recently provided settings or information.
CAUTION!
Do not place empty cookware on the heating plate.
Heating an empty pot or pan will activate the overheating protection mechanism,
an audio signal will sound and the unit will turn off.
The error code „E02" will be displayed.
If this happens, remove the cookware from the unit and leave it for several
minutes to cool. The unit will return to proper functioning.
can be used at any moment to change the temperature within a
and it will be shown on the digital display.
or . The memory
- 29 -