Publicité
Les langues disponibles
Les langues disponibles
H 260E, H 260E eco
To finish, press
or
COPY display flashes.
Press the ENTER key. The settings are saved. The
ON symbol flashes.
Confirm the BACK key to return to the standard
display.
9.3
Manual operation
NOTE
NOTE
The timer week program is deactivated in manual
operation.
The room temperature specification takes place
manually.
Press the MENU key.
Press
or
to select the MANUAL symbol. The
MANUAL symbol flashes. Press the ENTER key.
The ON symbol flashes. Press the ENTER key.
Use
or
to set the room temperature.
9.4
Frost protection
Specification of a frost protection temperature of 7° C
for the following 24 hours.
Press the MENU key.
www.dimplex.de/en
to select COPY. The
Press
or
FROST symbol flashes. Press the ENTER key.
FROST symbol and temperature 7° C are
displayed.
9.5
Runback timer
The runback timer enables the user to activate a one-
off, time-limited heating program.
Press the MENU key. The TIMER symbol flashes.
Press the ENTER key. The ON symbol flashes.
Press
or
symbol flashes.
Press the ENTER key =>Heating operation off.
Press the FORWARD key. Heating operation takes
place for 30 minutes (factory setting).
Where necessary, change the room temperature
with
or
.
To end prematurely, switch off the heating device.
Heating duration runback timer
The maximum heating duration, limited to 2 hours at
the factory and adjustable in four stages of 30 minutes
each, can be changed as shown in the table.
Press and hold the MENU key and the FORWARD
key for five seconds.
rb display flashes.
1806/A
to select the FROST symbol. The
to select the OFF symbol. The OFF
English
EN-5
Publicité
