Publicité
Les langues disponibles
Les langues disponibles
H 260E, H 260E eco
6. Control description
6.1
Control unit
The heating device is equipped with a configurable
electronic control, consisting of a display and six touch
screen keys. The control unit is located on the top on
the right. All settings can be selected using the six keys
on the user interface.
The set functions and values are shown on the display.
6.2
Key functions
MAIN MENU
Setting date and time
Timer week program
Manual operation
Frost protection mode
BACK
Return to the previous program item
Keys
Used to navigate through the menu and to change the
setting values.
ENTER
Saving settings.
FORWARD
Special functions such as switching to the next
programme item in timer mode or activating the run-
back timer.
www.dimplex.de/en
6.3
Display
The display lights up when this key is activated. If no
changes are made for a prolonged period, the display
switches off. If no key is pressed, the display returns to
the main menu after 30 seconds.
When the ENTER key is pressed, the 4-digit device
PIN is shown.
7. Possible operating modes
7.1
Timer week program
Up to four heating program (on/off) can be set for each
weekday. A room temperature can be specified for
each heating program.
TIMER symbol is shown in the display.
7.2
Manual operation
Manual specification of the room temperature.
MANUAL symbol is shown in the display.
7.3
Frost protection
Specified frost protection temperature of 7 °C.
FROST symbol is shown in the display.
NOTE
NOTE
The room temperature can be changed with the
keys in all operating modes.
In the timer program, this change is only carried out for
the current time program.
8. Commissioning
8.1
Setting the date and time
The control includes a real-time clock with calendar
function.
The date and time are set with the following steps:
Press the MENU key.
Press
or
The symbol flashes.
Press the ENTER key. The time flashes.
Press the ENTER key again. The hours display
flashes.
1806/A
to select the DATE & TIME symbol.
English
or
EN-3
Publicité
