Publicité
Les langues disponibles
Les langues disponibles
installation
The wireless 2 zone kit is a device for controlling up to 2 accessories including circula-
tion pumps, zone valves, etc., powered up to 230V.
Associating the wireless 2 zone kit with the radio receiver interfaces the device with all
products on the BUS BridgeNet® platform.
Install in an environment with normal pollution levels.
Warning!
Installation should be performed by a
qualified technician.
Before connecting the receiver, discon-
nect the power supply.
Power supply of the device must beconnect-
ed to a circuit breaker.
Positioning
Install the wireless 2 zone kit well away
from electromagnetic fields (for exam-
ple: televisions, computers, refrigerators,
microwave ovens), as these could affect
the operation of the device. Take extra
care when positioning the device near
lifts, stairways and metal wall structures,
as these may have an isolating effect with
regard to signal transmission and recep-
tion.
Wall installation
- Open the cover by pressing lightly on
the tab at the bottom of the receiver
(Fig. 1).
- Fix the device's base to the wall at the
chosen position, using the plugs and
screws supplied with the kit (Fig. 2).
10 - GB
Fig. 1
Fig. 2
Fig. 3
BUTTON
RED LED
GREEN LED
Publicité
