Assembly Recommendations - Bycool ECODIRNA DINAMIC 1.1 Instructions De Montage

DINAMIC 1.1
EN
ASSEMBLY
RECOMMENDATIONS
• Before starting assembly, please read instruc-
tions and follow them during installation process.
• Use the adequate tools for each operation.
ELECTRICITY
• Disconnect ignition key.
• Disconnect battery before starting assembly.
• Make sure electric components are securely
connected, checking their correct fitting.
DOCUMENTATION INCLUDED WITH
EQUIPMENT:
• Mounting instructions: 220.AA1.1008
• User's guide: 220.AA1.1002
• Troubleshooting: 220.AA1.1003
• Warranty: 220.AA1.0010
Indications concerning position are:
RIGHT: Passenger side
LEFT: Driver side
Driving torques (N.m)
Steel Quality
Fillet
8.8
M6/100 10
Hoses assembly
Driving torques (N.m)
Hose size
1/4"
3/8"
Wrench
opening
10.9
13 10
Fitting
Driving Tool
Torque
13-15 Wrench 14mm.
15-17 Wrench 19mm.
Ratchet wrench of 10
Cruciform screwdriver TOP 10
Wrench of 10
Wrench of 11
Wrench of 14
Wrench of 17
Wrench of 19
Allen key of 6
Socket wrench of Ø10
Broach Ø 4
Drill
Broach Ø6
Circular saw Ø19
Circular saw Ø22
Circular saw Ø48
Scissors
Riveter M6
WARNINGS:
• The installing personnel must have a sufficient tra-
ining in vehicles air conditioning.
dirna, s.a.
• shall not be responsible for break-
downs or damages coming from an inadequate han-
dling or installation of the equipment or from mo-
difications and substitutions carried out without our
express and written authorisation.
• Amount of refrigerant gas load R-134a to be
introduced in the circuit: 300 g.
• Please see product warranty procedure included
in Troubleshooting diagnosis.
• Please see equipment User's Guide for its correct
functioning of the remote control and control panel.
• Once installation is finished, the following docu-
ments must be handed over to the user: User's Gui-
de, Warranty and Troubleshooting Diagnosis.
18
dirna
Tools
, s.a.